• NVR Installation – Connecting the Cameras to the NVR

        Ensure the NVR is powered on, and is located within 3m of the cameras you wish to add. Connect the AC power connection to the camera’s power input, and ensure the camera is being plugged into an active power outlet. On the NVR itself, right click on the mouse to reveal the Quick Menu From the Quick Menu, select IPC Channel Config, as seen...
  • NVR Installation – Connecting the NVR to an HDMI Monitor

    Input the HDMI cable into the HDMI output on your NVR, and plug the other end of the HDMI cable into the HDMI input on your television or monitor. Please be aware that you must plug the other end of the HDMI cable into an input, like on a television or monitor, and not an HDMI output like on a laptop. Once you have...
  • NVR Operation – New Password

    After you’ve gone through the Setup Wizard, you will be asked to enter a password that will be used to protect your Zosi NVR from unwanted access. A password it not mandatory. If you wish to skip setting a password for your NVR, select “OK”. To set a new password: Using the mouse, select the text field beneath “New Password”. The virtual keyboard will appear....
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
Top
ic-expand
ic-cross-line-top